Phoenix ESSENTIAL-PS/1AC/24DC/480W/EE-power 2910588,ESSENTIAL edition power supply, primary switch mode, for DIN rail installation, input: 1 phase, output: 24V DC/480W
| AC operation |
| Rated input voltage range |
100V AC ... 240V AC |
| Input Voltage Range |
85V AC ... 264V AC |
| Attenuation |
< 100V (1 %/V) |
| AC input voltage range |
85V AC ... 264V AC |
| DC input voltage range |
120V DC ... 375V DC |
| Supply Voltage |
AC |
| Impulse current |
Typical 40 A (115V AC) |
| Typical 80 A (230V AC) |
| AC frequency range |
47Hz ... 63Hz |
| grid buffer time |
Typical 10 ms (115V AC) |
| Typical 16 ms (230V AC) |
| power consumption |
5.4 A (115V AC) |
| 2.7 A (230V AC) |
| Rated power consumption |
523.27 VA |
| protection circuit |
transient surge protection; varistor |
| Typical Response Time |
1000 ms |
| input fuse |
10 A (fast fuse, built-in) |
| PE discharge current |
< 1 mA (264V AC) |
| efficiency |
85 % (115V AC) |
| 88 % (230V AC) |
| output characteristics |
HICCUP |
| Rated output voltage |
24V DC ±2% |
| output voltage (USet) setting range |
22V DC ... 28V DC (max. power ≤ 48 0W) |
| Rated output current (IN) |
20 A |
| Attenuation |
> 40°C (1.67 % / °C, 115V AC) |
| > 50°C (2.5 % / °C,230V AC) |
| Maximum capacitive load |
8000 μF |
| Active Current Limit |
109-130% of maximum output power (in case of short circuit) |
| control deviation |
≤ 1% (change of load, static 10%... 90%) |
| typical. ± 2% (change in load, dynamic 10%... 90%) |
| < 0.1 % (input voltage variation is ± 10 %) |
| residual wave |
< 120 mVSS(-10°C ... +70°C) |
| < 240 mVSS(-20°C ... -10°C) |
| output power |
480W |
| maximum no-load power consumption |
5W (115V AC) |
| 4W (230V AC) |
| Maximum rated load power loss |
50W (115V AC) |
| 40W (230V AC) |
| Input |
| Connection Mode |
screw connection |
| Minimum cross section of rigid conductor |
0.823 mm² |
| Maximum cross section of rigid conductor |
8.365 mm² |
| flexible lead |
0.823 mm² |
| Flexible lead maximum cross section |
8.365 mm² |
| Minimum Wire Cross Section AWG |
18 |
| Maximum conductor cross section AWG |
8 |
| stripping length |
11mm |
| Minimum tightening torque |
1 Nm |
| Maximum tightening torque |
1.02 Nm |
| Output |
| Connection Mode |
screw connection |
| Minimum cross section of rigid conductor |
0.832 mm² |
| Maximum cross section of rigid conductor |
8.365 mm² |
| flexible lead |
0.832 mm² |
| Flexible lead maximum cross section |
8.365 mm² |
| Minimum Wire Cross Section AWG |
18 |
| Maximum conductor cross section AWG |
8 |
| stripping length |
7mm |
| Minimum tightening torque |
1 Nm |
| Maximum tightening torque |
1.02 Nm |
| Signal Type |
LED |
| Operating voltage display |
Green LED |
| signal output |
| Status Display |
DC OK LED green |
| phase number |
1 |
| insulation voltage input/output |
3 kV AC |
| insulation voltage output/PE |
0.5 kV AC |
| insulation voltage input/PE |
2 kV AC |
| Product Type |
power supply |
| product series |
ESSENTIAL POWER |
| MTBF (Telcordia SR-332) |
> 700000 h |
| insulation characteristics |
| protection level |
I (with PE connection) |
| pollution level |
2 |
