Phoenix F-MS Class 12 - 2 surge protector 2817987, Class 2 surge protector, including base and protective plug with N-PE total current spark gap, installed on NS 35/7.5 rail, shell thickness: 17.5mm(1 modulus)

Product Type surge protector
product series VALVETRAB MS
IEC Category II
T2
EN Type T2
IEC power supply system TN
TT
type DIN rail module, split, detachable
Bits 1
Surge protection fault alarm with visual status indication window
insulation characteristics
Overvoltage Category III
pollution level 2

Rated frequency fN 50Hz (60 Hz)

Connection Mode screw connection
thread M5
Tightening torque 3 Nm (1.5 mm² ... 16 mm²)
4.5 Nm (25 mm² ... 35 mm²)
stripping length 16mm
Flexible Wire Cross Section 1.5 mm² ... 25 mm²
Rigid conductor cross section 1.5 mm² ... 35 mm²
Attachable Guide Cross Section AWG 15 ... 2
Connection Mode fork cable end
Flexible Wire Cross Section 1.5 mm² ... 16 mm²

Dimensional drawing
width 17.6mm
height 89.8mm
depth 65.7mm (7.5mm with DIN rail)
Horizontal stitch pitch 1 Partition

color black (RAL 9005)
flame retardant rating to UL 94 V-0
material 600
insulation material PA 6.6/PBT
Material Group I
Shell Material PA 6.6
PBT

protection channel N-PE
movement direction N-PE
Rated voltage UN 240/415V AC (TN - only N-PE)
240/415V AC (TT - only N-PE)
Rated frequency fN 50Hz (60 Hz)
Maximum continuous operating voltage UC 260V AC
Rated load current IL 80 A
Residual Flow IPE ≤ 5 µA
Standby power consumption PC ≤ 1.5 mVA
Nominal discharge current In(8/20)µs 20 kA
Maximum discharge current Imax(8/20) µs 40 kA
Disconnect freewheeling capacity Ifi 100 A
voltage protection level Up ≤ 1.5 kV
Residual pressure Ures ≤ 0.4 kV (In)
≤ 0.25 kV (10 kA)
≤ 0.15 kV (at 5 kA)
≤ 0.1 kV (at 3 kA)
6 kV (1.2/50) & micro;s ≤ 1.5 kV
UT 1200V AC (200 ms/withstand mode)
response time tA ≤ 100 ns
maximum spare fuse with V-connection 80 A (gG)
2817974

Phoenix F-MS 12 - 2 class surge protector 2817987

Product Center

PRODUCT CENTER