Phoenix PWT 35-800AC-FM-1/2 class lightning protection/surge protector 2800419, lightning protection/surge protector, meets the requirements of type 1/2/class I/II, used for single-phase power supply network, PE and N combination installed in one wire (L1,PEN).
| Product Type | combination surge protector |
| product series | POWERTRAB |
| IEC Category | I / II |
| T1 / T2 | |
| EN Type | T1 / T2 |
| IEC power supply system | TN-C |
| IT | |
| type | Installation Module |
| Bits | 1 |
| Surge protection fault alarm | visual status indication window and remote alarm contact |
| insulation characteristics | |
| Overvoltage Category | 8 kV: IV (600 V), III (1000 V) |
| pollution level | 3 |
| Rated frequency fN | 50Hz (60 Hz) |
| Rated voltage UN | 690V AC |
| indicator/remote signaling | |
| Connection Name | Remote alarm contact |
| switching function | 2 N/C contacts, 1 position |
| Nominal operating voltage | 30V AC |
| 30V DC | |
| Operating current | 1.5 A AC |
| 1.5 A DC | |
| Power: Status Indicator/Remote | |
| working voltage | 19.2V AC/DC ... 30V AC/DC |
| working current | 7 mA AC/DC ... 13 mA AC/DC |
| Rated current | 10 mA AC/DC |
| 1 A (e.g. T to IEC 127-2/III) | |
| Anti-interference ability according to IEC 61000-4-5 (core to core) | 1 kV |
| Anti-interference ability according to IEC 61000-4-5 (core to ground) | 6 kV |
| dual wiring position | |
| Connection Mode | screw connection |
| thread | M6 |
| Tightening torque | 8.5 Nm |
| stripping length | 24mm |
| Flexible Wire Cross Section | 16 mm² ... 50 mm² |
| Rigid conductor cross section | 16 mm² ... 50 mm² |
| Attachable Guide Cross Section AWG | 6 ... 1/0 |
| PE line connection | |
| Connection Mode | ring cable pin |
| Tightening torque | 20 Nm |
| Flexible Wire Cross Section | 16 mm² ... 95 mm² |
| Rigid conductor cross section | 16 mm² ... 95 mm² |
| Attachable Guide Cross Section AWG | 6 ... 3/0 |
| Remote alarm contact | |
| thread | M3 |
| Tightening torque | 0.55 Nm |
| stripping length | 7mm |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 56mm |
| height | 191mm |
| depth | 280mm |
| Horizontal stitch pitch | 3 Division |
| color | silver |
| flame retardant rating to UL 94 | V-2 |
| material | 600 |
| 250 | |
| insulation material | PA/PC |
| Material Group | I (PA 6.6/PC) |
| IIIa (PA 4.6) | |
| Shell Material | die-cast aluminum, salt water resistant |
| Shell surface material | aluminum die casting |
Phoenix PWT 35-800AC-FM-1/2 class lightning protection/surge protector 2800419
