Phoenix REL-MR- 4,5DC/21AU-single relay 2961370, plug-in miniature power relay, with multi-layer gold-plated contacts, 1 switching contact, input voltage 4.5V DC

Product Type Single relay
Mode of operation 100% operating factor
mechanical life 2x 107Switch Times
insulation characteristics
Overvoltage Category III
pollution level 3
Data Management Status
Last data maintenance date 11.04.2025

rated conditions 0.17W
test voltage (coil/contact) 4 kV AC (50Hz,1 min, coil/contact)

coil side
Rated input voltage UN 4.5V DC
Input Voltage Range 2.7V DC ... 12.4V DC
drives and functions monostable
drive (polarity) Inpolarity
UN 38 mA
Typical Response Time 5 ms
Typical release time 2.5 ms
coil resistance 119 Ω ± 10% (at 20°C)

switching
Contact Type 1 changeover contact
Switch Contact Type Single contact
Contact Material AgSnO, hard gold plating
maximum switching voltage 30V AC
36V DC
Minimum Switching Voltage 100 mV (at 10 mA)
limit continuous current 50 mA
Maximum impact current according to customer requirements
minimum switching current 1 mA (24 V)
Maximum power rating (resistive load) 1.2W (24V DC)
switching: when the gold plating layer is destroyed
Considerations If the gold plating is damaged, the following values are applicable.
Contact Material AgSnO
maximum switching voltage 250V AC
Minimum Switching Voltage 5V (100 mA)
limit continuous current 6 A
minimum switching current 10 mA (at 12V)
Maximum power rating (resistive load) 140W (24V DC)
20W (available for 48V DC)
18W (available for 60V DC)
23W (available for 110V DC)
40W (available for 220V DC)
1500 VA (available for 250V AC)
switch capacity 2 A (24V, DC13)
0.2 A (at 110V, DC13)
0.1 A (220V, DC13)
3 A (24V, AC15)
3 A (120V, AC15)
3 A (230V, AC15)

Connection Mode Plugging/Soldering
2961118

Phoenix REL-MR- 4,5DC/21AU-Single Relay 2961370

Product Center

PRODUCT CENTER