Phoenix ST-REL7-HG220/4X21-Relay connector 2892465, relay connector, equipped with Hengstler miniature circular relay, contact (AgSnO2 Au): small to large load, 4PDT, input voltage 220V DC, with indicator light, can be inserted on the base

Product Type Relay Module
Mode of operation 100% operating factor
mechanical life about 107Switch Times
insulation characteristics
Overvoltage Category II
pollution level 2
Data Management Status
Last data maintenance date 03.07.2025

rated conditions 1.32W
test voltage (coil/contact) 2 kV AC (50Hz,1 min, coil/contact)
test voltage (changeover contact/changeover contact) 2 kV AC (50Hz,1 minute, changeover contact/changeover contact)

coil side
Rated input voltage UN 220V DC
Input Voltage Range 176V DC ... 242V DC (20 °C)
drives and functions monostable
drive (polarity) polarization
UN 6 mA
Typical Response Time 15 ms (for DC)
Typical release time 15 ms (for DC)
protection circuit Damping diode, polarity protection; Damping diode, polarity protection diode
Operating voltage display is

switching
Contact Type 4 PDT
Switch Contact Type single contact
Contact Material AgSnO, hard gold plating
maximum switching voltage 250V AC/DC
limit continuous current 6 A
Maximum impact current 6 A
Maximum power rating (resistive load) 120W (24V DC)
180W (available for 48V DC)
105W (available for 60V DC)
60W (available for 110V DC)
90W (available for 220V DC)
1250 VA (available for 250V AC)

width 45.6mm
height 33mm
depth 66.5mm

color Green (RAL 6021)

environmental conditions
ambient temperature (operation) -20°C ... 60°C
ambient temperature (storage/transport) -20°C ... 70°C
2911728

Phoenix ST-REL7-HG220/4X21-Relay Connector 2892465

Product Center

PRODUCT CENTER