Phoenix REL-MR- 24DC/ 1ICT-single relay 2987338, pluggable miniature power relay, with tungsten front contact for large inrush current with a peak value of 800 A, 1 normally open contact, input voltage: 24V DC
Product Type
Single relay
Mode of operation
100% operating factor
mechanical life
3x 107 Switch Times
insulation characteristics
insulation
safety isolation, reinforced insulation
Overvoltage Category
III
pollution level
3
Data Management Status
Last data maintenance date
25.08.2025
Electrical characteristics
rated conditions
0.41W
test voltage (coil/contact)
5 kV AC (50Hz,1 min, coil/contact)
Rated insulation voltage
250V AC
Rated overvoltage
6 kV
input data
coil side
Rated input voltage UN
24V DC
Input Voltage Range
19.2V DC ... 54V DC
to UN as reference
See Graph
drives and functions
monostable
drive (polarity)
Inpolarity
UN
17 mA
Typical Response Time
8 ms
Typical release time
3 ms
coil resistance
1440 Ω ± 10% (20°C)
Output Data
switching
Contact Type
1 N/O contact
Switch Contact Type
single contact
Contact Material
AgSnO
maximum switching voltage
250V AC/DC
Minimum Switching Voltage
12V (100 mA)
limit continuous current
16 A
Maximum impact current
165 A (20 ms)
800 A (200 µs)
minimum switching current
100 mA (for 12V DC)
Maximum power rating (resistive load)
384W (24V DC)
58W (available for 48V DC)
48W (available for 60V DC)
50W (available for 110V DC)
80W (available for 220V DC)
4000 VA (available for 250V AC)
Minimum on-off capacity
1200 mW
switch capacity
2 A (24V, DC13)
0.2 A (at 110V, DC13)
0.2 A (250V, DC13)
6 A (24V, AC15)
6 A (120V, AC15)
6 A (250V, AC15)
connection data
Connection Mode
Plugging/Soldering
Dimensions
Dimensional drawing
width
12.7mm
height
29mm
depth
15.7mm
