Phoenix CSS 0.75-3/3-EMC-motor governor 1201829, motor governor with soft start and configurable speed, used to start and reverse motors up to 480V AC and 0.75 kW, configurable motor Protection, analog input, STO function up to SIL 3/PL e, three-phase load input, integrated interference suppression filter
| Product Type | speed starter |
| product series | CONTACTRON |
| Operation Elements | button |
| rotary switch | |
| insulation characteristics | |
| pollution level | 2 |
| phase number | 3 |
| Power | |
| phase number | 3 |
| input voltage | 380V AC |
| 400V AC | |
| 480V AC | |
| Input Voltage Range | 220V AC ... 480V AC -15 % ... +10% |
| Frequency Range | 47Hz ... 63Hz |
| Rated current | 2.8 A (wireless circuit reactor) |
| 2.4 A (with line reactor) | |
| Rated motor power | 0.75 kW |
| apparent power | 1.7 kVA |
| Rated output current (IN) | 2.5 A (4 kHz) |
| 1.8 A (8 kHz) | |
| 1 A (16 kHz) | |
| output frequency | 0Hz ... 500Hz |
| power consumption | 29W (2 kHz) |
| 36W (4 kHz) | |
| 34W (8 kHz) | |
| 32W (16 kHz) | |
| 9W (Standby) | |
| output current | ≤ 3.75 A (180 s) |
| ≤ 1.875 A (180 s, within recovery time) | |
| ≤ 4.5 A (15 s) | |
| ≤ 1.25 A (15 s, within recovery time) | |
| Recovery Time | 150 s (180 s) |
| 12 s (15 s) | |
| overload time | 30 s (180 s) |
| 3 s (15 s) | |
| discharge time | 3 min (intermediate circuit capacitor) |
| switching | |
| Output Name | relay output |
| Contact Type | 1 changeover contact |
| maximum switching voltage | 125V AC |
| 30V DC | |
| Maximum impact current | 3 A |
| Minimum impulse current | 10 mA (5V DC) |
| power supply module | |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| Rigid conductor cross section | 0.2 mm² ... 6 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 6 mm² |
| 0.2 mm² ... 4 mm² (with cold press head) | |
| Attachable Guide Cross Section AWG | 24 ... 10 |
| control terminal | |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| Rigid conductor cross section | 0.2 mm² ... 1.5 mm² (with cold press head) |
| Flexible Wire Cross Section | 0.2 mm² ... 1.5 mm² |
| 0.2 mm² ... 0.75 mm² | |
| Attachable Guide Cross Section AWG | 24 ... 16 |
| Drilling | |
| diameter | 5.5mm |
| width | 35mm |
| height | 210mm |
| depth | 195mm |
| length | ≤ 30 m (length of motor cable (in accordance with C3 electromagnetic compatibility regulations)) |
| ≤ 50 m (motor cable length (without EMC compliance)) | |
Phoenix CSS 0.75-3/3-EMC-Motor Governor 1201829
