Phoenix PP-RJ-SCC-distribution frame 2703018, distribution frame, RJ45 socket to in-line terminal block, CAT5e,10/100/1000 Mbps,DIN rail adapter, IP20, shielded connection using clip
| Product Type |
distribution frame |
| MTTF |
105699 years |
| insulation characteristics |
| Overvoltage Category |
II |
| pollution level |
2 |
| rated conditions |
0W (passive module, no power required) |
| Rated insulation voltage |
85V DC (conforming to EN/IEC 60079-7, Annex H) |
| data: Ethernet interface, 10/100/1000Base-T(X), compliant with IEEE 802.3 |
| serial transmission rate |
10/100/1000 Mbps |
| Frequency Range |
125 MHz |
| Connection Mode |
in-line connection |
| Connection Method Considerations |
CAT5e |
| Pin Distribution |
1:1 |
| Transmission Length |
100 m (including tail cable) |
| single wire/wiring point, rigid |
0.2 mm² ... 1.5 mm² |
| single wire/wiring point, flexible |
0.2 mm² ... 1.5 mm² |
| Flexible conductor cross-section, with sleeve, with plastic insulation sleeve |
0.25 mm² ... 1.5 mm² (only with CRIMPFOX 6 wire clamps) |
| flexible conductor cross-section with cold press head without insulation sleeve |
0.25 mm² ... 1.5 mm² (only with CRIMPFOX 6 wire clamps) |
| AWG Strand Maximum Cross Section, Flexible |
16 |
| AWG Wire Minimum Cross Section, Flexible |
26 |
| single wire/wiring point, maximum rigid AWG |
16 |
| Single Wire/End Point, Minimum Rigid AWG |
26 |
| stripping length |
8mm |
| transmission medium |
copper cable |
| Rated output voltage |
< 57V DC |
| Maximum output power |
60W |
| Maximum output current |
725 mA (per channel) |
| data: Ethernet interface, 10/100/1000Base-T(X), compliant with IEEE 802.3 |
| Connection Mode |
RJ45 female connector |
| Dimensional drawing |
|
| width |
23.8mm |
| height |
101.3mm |
| depth |
50mm |
| color (shell) |
light gray (RAL 7035) |
| Identification Material (Shell) |
plastic |
| flame retardant rating to UL 94 |
V0 |
| Cable outer diameter |
5.5mm ... 6.5mm |
