Phoenix SFP 1-10/120AC-EMC filter surge protection equipment 2920670, equipment protection, conforms to Class 3/Class III, with network interference suppression filter to prevent high-frequency interference voltage, used for single-phase power supply network, Zero ground separation (3-wire system: L1, N, PE), with remote communication contact.

Product Type interference suppression filter
Product Series SFP
IEC power supply system TN
TT
IT
type rail mounting module, monolithic
Bits 2
USA, CN, BR
Surge protection fault alarm visual status indication window and remote alarm contact
insulation characteristics
Overvoltage Category III
pollution level 2
IEC Category III
T3
EN Type T3
Ports Two

indicator/remote signaling
Connection Name Remote alarm contact
switching function changeover contact
Nominal operating voltage 12V AC ... 250V AC
250V DC (250 mA DC)
working current 100 mA AC ... 1 A AC
1 A DC (48V DC)

Connection Mode screw connection terminal
thread M3
Tightening torque 0.5 Nm ... 0.6 Nm
4.5 lbf-in. ... 5.5 lbf-in.
Flexible Wire Cross Section 2.5 mm² ... 4 mm²
Rigid conductor cross section 2.5 mm² ... 6 mm²
Attachable Guide Cross Section AWG 14 ... 10

Dimensional drawing
width 112mm
height 86.6mm
depth 79mm

color black (RAL 9005)
silver
flame retardant rating, according to UL 94 V-0
insulation material ABS
Shell Material Aluminum

Mechanical parameters
Open Side Panel No

protection channel L-N
L-PE
N-PE
movement direction L-N & L(N)-PE
Rated voltage UN 120V AC (TN)
120V AC (TT-only with RCD)
120V AC (IT)
Rated frequency fN 50Hz (60 Hz)
Maximum continuous operating voltage UC 150V AC
Rated load current IL 10 A (60 °C)
Residual Flow IPE ≤ 0.6 mA
Standby power consumption PC ≤ 7.5 VA (UREF)
≤ 10 VA (UC)
Reference test voltage UREF 132V AC
Nominal discharge current In(8/20)µs 3 kA
Combined surge UOC 6 kV (3 kA)
voltage protection level Up ≤ 0.45 kV
2859987

Phoenix SFP 1-10/120AC-EMC Filter Surge Protection Equipment 2920670

Product Center

PRODUCT CENTER