Phoenix VAL-MS 60 - 2 surge protector 2868020, surge protector, including base and protective plug with high-power varistor, installed on NS 35/7.5 rail, single channel

Product Type surge protector
Product Series VALVETRAB MS
IEC Category II
T2
EN Type T2
IEC power supply system TN
type DIN rail module, split, detachable
Bits 1
Surge protection fault alarm with visual status indication window
insulation characteristics
Overvoltage Category III
pollution level 2

Rated frequency fN 50Hz (60 Hz)

Connection Mode screw connection
thread M5
Tightening torque 3 Nm (1.5 mm² ... 16 mm²)
4.5 Nm (25 mm² ... 35 mm²)
stripping length 16mm
Flexible Wire Cross Section 1.5 mm² ... 25 mm²
Rigid conductor cross section 1.5 mm² ... 35 mm²
Attachable Guide Cross Section AWG 15 ... 2
Connection Mode fork cable end
Flexible Wire Cross Section 1.5 mm² ... 16 mm²

Dimensional drawing
width 17.6mm
height 89.8mm
depth 65.7mm (7.5mm with DIN rail)
Horizontal stitch pitch 1 Partition

color black (RAL 9005)
flame retardant rating to UL 94 V-0
material 600
insulation material PA 6.6/PBT
Material Group I
Shell Material PA 6.6
PBT

protection channel L-PEN
movement direction 1L-N/PE
Rated voltage UN 60V AC (TN)
60V DC
-48V DC (RRH)
Rated frequency fN 50Hz (60 Hz)
Maximum continuous operating voltage UC 75V AC
100V DC
Rated load current IL 80 A
Residual Flow IPE ≤ 0.45 mA
Standby power consumption PC ≤ 35 mVA
Nominal discharge current In(8/20)µs 15 kA
Maximum discharge current Imax(8/20) µs 40 kA
Rated short-circuit current ISCCR 25 kA
voltage protection level Up ≤ 0.55 kV
Residual pressure Ures ≤ 0.55 kV (In)
≤ 0.425 kV (10 kA)
≤ 0.325 kV (at 5 kA)
≤ 0.275 kV (at 3 kA)
UT 100V AC (5 seconds/withstand mode)
response time tA ≤ 25 ns
maximum spare fuse with V-connection 80 A AC (gG)
maximum spare fuse with branch wiring 125 A AC (gG)
50 A DC (gG)
2817974

Phoenix VAL-MS 60 - 2 class surge protector 2868020

Product Center

PRODUCT CENTER