Phoenix FL SFP LX40-Dielectric module 1113081, gigabit SFP module, used to realize transmission over a distance of up to 40km through a wavelength of 1310 nm
| width | 13.7mm |
| height | 8.95mm |
| Length | 56.5mm |
| Application Description | |
| Application Description | for industrial applications only |
| Installation Type | Insert SFP Slot |
| Ethernet FO | |
| Connection Mode | LC |
| transmission speed | 1 GBit/s |
| minimum transmission power | -3 dBm |
| Maximum transmission power | 2 dBm |
| Minimum Receiving Sensitivity | -3 dBm |
| receiver | -23 dBm |
| transmission principle | single-mode glass fiber |
| Transmission Length | 40 km (glass fiber 9/125) |
| wavelength | 1310 nm |
| signal LED | depends on Factoryline equipment |
| Channels | 1 (LC single mode) |
| Product Type | SFP Module |
| type | Factoryline device with SFP slot |
| format | SFP (Compact Plugable Optical Transceiver) |
| basic functions | SFP module as FO port |
| Status Display | through Factoryline equipment |
| transmission medium | FO |
| environmental conditions | |
| protection level | IP20 |
| ambient temperature (operation) | -40°C ... 70°C (non-condensing) |
| ambient temperature (storage/transport) | -40°C ... 85°C (non-condensing) |
| Case temperature | 85°C max (operating) |
| Allowable humidity (operating) | 5%... 95% (non-condensing) |
| Permissible humidity (storage/transportation) | 30%... 95% (non-condensing) |
| vibration (operation) | conforming to IEC 60068-2-6: 5g,150Hz |
| air pressure (operation) | 86 kPa ... 108 kPa (altitude 1500 m) |
| air pressure (storage/transport) | 66 kPa ... 108 kPa (altitude 3500 m) |
Phoenix FL SFP LX40-Media Module 1113081
