Phoenix VAL-MB-T2 1500DC-PV/2 V-FM-2 surge protector 2905646, surge protector, used for 2-position insulated grounding 1,500V DC photovoltaic voltage system, suitable for DIN rail installation, with remote communication contact, temperature monitoring protection element, status information displayed on the module.
| Product Type | PV Protector |
| product series | VALVETRAB MB |
| IEC Category | PV II |
| PV T2 | |
| EN Type | T2 |
| IEC power supply system | DC |
| type | rail mounting module, monolithic |
| Installation position | Indoor |
| separation device | inside |
| accessibility | accessible |
| Connection Configuration | Y Configuration |
| end of life mode | OCFM (Partition Error Behavior) |
| Surge protection fault alarm | visual status indication window and remote alarm contact |
| insulation characteristics | |
| pollution level | 2 |
| indicator/remote signaling | |
| Connection Name | Remote alarm contact |
| switching function | changeover contact |
| Nominal operating voltage | 5V AC ... 250V AC |
| 5V DC ... 30V DC | |
| Operating current | 5 mA AC ... 1.5 A AC |
| 5 mA DC ... 1 A DC | |
| Connection Mode | screw connection |
| thread | M5 |
| Tightening torque | 3 Nm |
| stripping length | 16mm |
| Flexible Wire Cross Section | 2.5 mm² ... 35 mm² |
| Attachable Guide Cross Section AWG | 14 ... 2 |
| Remote alarm contact | |
| Connection Mode | screw connection |
| thread | M2 |
| Tightening torque | 0.25 Nm |
| stripping length | 7mm |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 28 ... 16 |
| Dimensional drawing | |
| width | 71.2mm |
| height | 120mm |
| depth | 65.5mm (7.5mm with DIN rail) |
| Horizontal stitch pitch | 4 Zoning |
| color | gray (RAL 7042) |
| gray (RAL 7042) | |
| flame retardant rating to UL 94 | V-0 |
| insulation material | PA 6.6 |
| PBT | |
| Shell Material | PA 6.6 |
| Mechanical parameters | |
| Open Side Panel | No |
| protection channel | (L ) - (L-) |
| (L ) - PE | |
| (L-) - PE | |
| movement direction | (L )-PE & (L-)-PE & (L )-(L-) |
| Rated load current IL | 50 A |