Phoenix CABLE-D-37SUB/F/OE/0,25/S/10M-cable 2906217, prefabricated round shielded cable; connection 1: single wire (37-position) (the cable is marked and equipped with a sleeve. The braided shield is connected to both ends of the cable.); Connection 2: D-SUB socket board (1x 37-position); Cable length: 10 m
Product Type
System Cable
environmental conditions
protection level
IP20
protection level (installation position)
≥ IP54 (installation position)
Ambient temperature (operating) (fixed installation)
-40°C ... 70°C (fixed installation)
ambient temperature (operating) (movable installation)
-10°C ... 70°C (movable installation)
ambient temperature (storage/transport)
-40°C ... 80°C
elevation
≤ 2000 m
Nominal operating voltage (AC)
≤ 30V AC
Nominal operating voltage (DC)
≤ 60V DC
Rated operating mode
100% Eligible
current (per path)
≤ 2 A (expanded, see attenuation)
Cable Length
10 m
37X0.25 [PVC]
UL AWM
2464/1061
Bits
37
Shielding
have
Cable Type
37X0.25 [PVC]
Wire Model
prefabricated circular shielded cable
wire structure signal line
14x 0.15mm
AWG, signal wire
24
Wire Cross Section
37x 0.25 mm²
wire diameter, including insulation
1.2mm ± 0.05mm
Cable outer diameter
10.80mm ± 0.5mm
outer sheath, material
semi-rigid PVC
outer sheath, color
Grey
Wire Material
copper stranded wire
Cable resistance
≤ 80 Ω/km (at 20°C)
insulation resistance
≥ 20 MΩ * km (at 20°C)
minimum bending radius, fixed mounting
90mm
minimum bending radius, mobile installation
170mm
Dynamic Load Capacity (Bending)
: 5000 (radius ≥ 15x outer diameter)
Halogen-free
No
flame retardant
IEC 60332-1-2 (bare cable)
VDE 0842, Part 332-1-2 (Bare cables)
IEC 60332-3-22 (bare cable)
UL VW-1
CSA FT-1
oil resistance
Resistance to occasional welding chip spatter (bare cable)
connection 1
Connection Mode
single line
stripping length (sheath)
150mm
Bits
37
Considerations
cables are marked and fitted with sleeves. The braided shields are attached to both ends of the cable respectively.
