Phoenix MINI MCR-BL-PT100-I-LP-NC-temperature measurement transmitter 2810609, configurable loop-powered signal isolation transmitter for Pt 100 temperature sensor, measuring range -150°C ... 300°C, screw connection
| Product Type | temperature measurement transmitter |
| product series | MINI Analog |
| Channels | 1 |
| Model | temperature signal isolation transmitter |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 2 |
| step response (0-99%) | < 500 ms |
| maximum temperature coefficient | < 0.02 %/K |
| set range | ((90K / Δ temp) + 0.05)% |
| Full-scale transmission fault | ≤ 0.25% |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 50V AC/DC |
| Test Voltage | 1.5 kV AC (50 Hz, 60 s) |
| insulation | foundation isolation conforming to IEC/EN 61010 |
| power supply | |
| Name | loop power supply |
| Supply Voltage Range | 12V DC ... 30V DC |
| Maximum current consumption | < 3.5 mA (no signal current) |
| power consumption | < 42 mW |
| signal | |
| Input Number | 1 |
| measurement | |
| Available Sensor Types (RTDs) | Pt 100 (IEC 60751/EN 60751) |
| Temperature measurement range | -150°C ... 300°C |
| Temperature measurement range | minimum 50 K |
| sensor type: | -150°C ... 300°C (configurable) |
| Sensor Input Current | 1 mA (constant) |
| Allowable Total Conductor Resistance | 10Ω (per cable) |
| connection system | 3 lines |
| signals: current | |
| outputs | 1 |
| configurable/programmable | No |
| current output signal | 4 mA ... 20 mA |
| Maximum current output signal | 23 mA (output limit) |
| load/output load current output | (Upower supply- 12 V)/ 22 mA |
| fluctuation | < 20 mVSS(at 500 Ω) |
| Connection Mode | screw connection |
| stripping length | 12mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 26 ... 12 |
Phoenix MINI MCR-BL-PT100-I-LP-NC-temperature measurement transmitter 2810609
