Phoenix MINI MCR-BL-U-I-4-isolation amplifier 2810492,3-way signal isolation transmitter, used for galvanic isolation of analog signals, using screw connection, input signal: 0V ... 10V, output signal: 4 mA ... 20 mA
| Product Type | isolation amplifier |
| Product Series | MINI Analog |
| Channels | 1 |
| Model | Input Isolation Amplifier |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 2 |
| electrical isolation | 3 End Isolation |
| cut-off frequency (3dB) | about 100Hz |
| step response (10-90%) | 500 ms |
| maximum temperature coefficient | < 0.01 %/K |
| temperature coefficient, typical | < 0.002 %/K |
| Maximum transmission error | < 0.1 % (of terminal value) |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 50V AC/DC |
| Test Voltage | 1.5 kV AC (50 Hz, 60 s) |
| insulation | foundation isolation conforming to IEC/EN 61010 |
| power supply | |
| Rated supply voltage | 24V DC ±10% |
| Supply Voltage Range | 19.2V DC ... 30V DC |
| Maximum current consumption | < 20 mA |
| power consumption | < 450 mW |
| signals: voltage | |
| Input Number | 1 |
| configurable/programmable | No |
| voltage input signal | 0V ... 10V |
| Maximum voltage input signal | 30V |
| input voltage | about 100 kΩ |
| signal | |
| outputs | 1 |
| No-load voltage | about 12.5V |
| current output signal | 4 mA ... 20 mA |
| Maximum current output signal | 28 mA |
| load/output load current output | ≤ 500 Ω |
| fluctuation | < 20 mVSS(at 500 Ω) |
| Connection Mode | screw connection |
| stripping length | 12mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 26 ... 12 |
Phoenix MINI MCR-BL-U-I-4-Isolation Amplifier 2810492
