Phoenix FLT-SEC-H-T1-440/25-P-1 type surge protector-plug-in 2907261, spare plug, used to FLASHTRAB the lightning current protection device of SEC HYBRID 440 product series, suitable for L-N and L-PEN lines.
| Product Type | Spare Plug |
| Product Series | SEC Family |
| IEC Category | I / II |
| T1 / T2 | |
| EN Type | T1 / T2 |
| IEC power supply system | TN |
| IT | |
| type | needle type |
| Bits | 1 |
| Surge protection fault alarm | with visual status indication window |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated frequency fN | 50Hz (60 Hz) |
| Connection Mode | pluggable |
| Dimensional drawing | |
| width | 35.5mm |
| height | 113.4mm |
| depth | 64.2mm |
| Horizontal stitch pitch | Division 2 |
| color | light gray (RAL 7035) |
| gray (RAL 7042) | |
| flame retardant rating, according to UL 94 | V-0 |
| material | 600 |
| insulation material | PA 6.6-FR 20% GF |
| PBT-FR | |
| Material Group | I |
| Shell Material | PA 6.6-FR 20 % GF |
| PBT-FR |
| protection channel | L-N |
| L-PE | |
| L-PEN | |
| N-PE (4+0) | |
| movement direction | L-N / L-PEN |
| Rated voltage UN | 400V AC (TN) |
| 400V AC (IT) | |
| Rated frequency fN | 50Hz (60 Hz) |
| Maximum continuous operating voltage UC | 440V AC |
| Residual Flow IPE | ≤ 5 µA |
| Nominal discharge current In(8/20)µs | 25 kA |
| Maximum discharge current Imax(8/20) µs | 50 kA |
| impulse discharge current (10/350)& micro;s, charging | 12.5 |
| impulse discharge current (10/350)& micro;s, specific energy | 160 kJ/Ω |
| impulse discharge current (10/350)& micro;s, peak limp | 25 kA |
| Disconnect freewheeling capacity Ifi | 50 kA |
| Rated short-circuit current ISCCR | 50 kA |
| voltage protection level Up | ≤ 2.5 kV |
| Residual pressure Ures | ≤ 2.1 kV (In) |
| ≤ 2.8 kV (at 50 kA) | |
| ≤ 1.7 kV (at 12.5 kA) | |
| ≤ 1.5 kV (at 5 kA) | |
| ≤ 1.35 kV (at 2.5 kA) | |
| 6 kV (1.2/50) & micro;s | ≤ 2.5 kV |
| UT | 580V AC (5 seconds/withstand mode) |
| 760V AC (120 min/tolerance mode) | |
| 1640V AC (200 ms/SAFE mode) | |
| response time tA | ≤ 100 ns |
| environmental conditions | |
| protection level | IP20 |
| ambient temperature (operation) | -40°C ... 80°C |
| ambient temperature (storage/transport) | -40°C ... 80°C |
| elevation | ≤ 2000 m (amsl) |
| Allowable humidity (operating) | 5%... 95% |
Phoenix FLT-SEC-H-T1-440/25-P-1 type surge protector-plug 2907261
